1 Review
- THIS ITEM IS NOT A HELMET, ONLY REPLACEMENT FASTENERS.
- Body & knob are made from lightweight 6061-t6 aluminum. Item surface was anodized to create a glossy film that won’t grow dark for long-time use.
- Fit for the flip hood and replace easily damaged plastic fasteners.
- Fit for fiber-metal 2090 with 3C headgear too.
- Due to different helmets design, if you want to make the fasteners tighter, It’s recommended to put 1/4″ external tooth lock washers on them and they will hold very strong.
- The original design and high quality. Any questions, please contact us for help.
$500.00
Excluded Tax
20 Reviews
- This Diamond wheel is compatible with our 3mirrors tungsten electrode sharpener grinder. Please check what you need is 25MM / 35MM wheels before purchase.
- 10 x 25mm cutting discs/ Full Sand Diamond wheels; 2 x Mandrels/ Connecting Rods(NEW CNC UPGRADE, More Durable).
- Material: Quality Carbon Steel; Disc Diameter: 25MM.
- Full sand Diamond Wheels, Wheel, and the sharping system are great to use.
- With good hardness, wear resistance, and good impact resistance. Also, can be used with your rotary tool to cut a wide variety of materials like wood, metal, gem, jade, etc.
$10.00
Excluded Tax
18 Reviews
- This grinding tool with widely applicable sizes. The Lastest design is available for 6 sizes of tungsten needles: 040″, 1/16″, 5/64″, 3/32″, 1/8″, 5/32″ (1mm, 1.6mm, 2mm, 2.4mm, 3.2mm, 4mm); Each size can grind 4 tip angles: 15° 18° 22.5° 30° (30° 36° 45° 60°).
- It is very light and convenient. But very strong and precise. All holes are stationary, so we can set an offset compensation for each size hole to make sure all tungsten’s tip center is on the grinding center point, this offset can ensure that the lines on the tip of the tungsten electrode are as straight as possible. If the hole position is variable, offset compensation cannot be set.
- The tungsten sharpening tool also has tungsten cut-off port processing. After the tungsten you are using is worn or contaminated, you can use the cut-off port for cutting so that you can use it again. Besides, A Flat Grinding Block is specially designed, can be used to grind a flat tip vertically, for use if needed.
- All holes are designed to use the same height as the diamond wheel. Needn’t set the height again and again. Very easy to install and use. Save your ready time for welding, Welders deserve it! Product made of Upgrade aluminum alloy material, CNC finishing more Durable, there will be no trouble of high temperature melting.
- This tool is essential for real professionals. We know welders, so we know what they need. Welders are very particular, pursue perfection. But some of them forgot health. Innovative design! This tool comes with Dust Housing, is easy to collect and process tungsten powder, also can protect you away from tungsten dust. The kit comes with Rotary Tool and a small storage bag.
$120.00
Excluded Tax
23 Reviews
- Size: 6 guide holes: 1mm, 1.6mm, 2.0mm, 2.4mm, 3.2mm and 4.0mm. The guides ensure concentrically and increase the Multi-utilisation of the diamond grinding wheel.
- Angle: 4 Angle offset: 15°, 18°, 22.5°, and 30° (30°, 36°, 45°, 60° Included Angle respectively).
- Dust Cover: Our Tungsten Grinders also feature perspex sealed for cover-safe and dust-free use.
- Cut Off Slot: For cutting off blobs if you’ve had a rare “whoopsie”.
- Diamond: Our diamond discs are double-sided for longer life, flip, and you’re on your way!
$90.00
Excluded Tax
91 Reviews
- [Size] 0/40, 1/16″, 3/32″ and 1/8″ (1mm, 1.6mm, 2.4mm, 3.2mm).
- [Angle] 22.5°, 20°, 15° and 10° (45°, 40°, 30°, 20° Tips Angle respectively)
- [Fitment] It fits most Rotary Tools with a 3/4-12 thread including Black and Decker, Milwaukee, Bosch Dremel, and More.
- [Cut Off Slot] For cutting off blobs if you’ve had a rare “whoopsie”.
- [Diamond] Our diamond discs are double-sided for longer life, flip, and you’re on your way!
- [Brass] This comes with a set of brass knurled preset at certain degrees for different sizes of tungsten, which you can customize.
$70.00
Excluded Tax
80 Reviews
- [Size] 1/16″, 3/32″ (1.6mm, 2.4mm).
- [Angle] 20°, 15° (40°, 30° Tips Angle respectively)
- [Fitment] It fits most Rotary Tools with a 3/4-12 thread including Black and Decker, Milwaukee, Bosch Dremel, and More.
- [Cut Off Slot] For cutting off blobs if you’ve had a rare “whoopsie”.
- [Diamond] Our diamond discs are double-sided for longer life, flip, and you’re on your way!
- [Simplistic] This type is suit for welders who need 1-2 sizes, angels frequently, regularly. It must be more practical.
$50.00
Excluded Tax
22 Reviews
- [Size] 1/16″, 3/32″ (1.6mm, 2.4mm).
- [Angle] 20°, 15° (40°, 30° Tips Angle respectively)
- [Fitment] It fits most Rotary Tools with a 3/4-12 thread including Black and Decker, Milwaukee, Bosch Dremel, and More.
- [Cut Off Slot] For cutting off blobs if you’ve had a rare “whoopsie”.
- [Diamond] Our diamond discs are double-sided for longer life, flip, and you’re on your way!
- [Simplistic] This type is suit for welders who need 1-2 sizes, angels frequently, regularly. It must be more practical.
- [Rotaty Tool] It is 110V/220~50/60Hz,180W. 10000-37000RPM/min; This comes with a 5-Speed control and US charger which can be durable used for many years.
$80.00
Excluded Tax
2 Reviews
- Size: 6 guide holes: 1mm, 1.6mm, 2.0mm, 2.4mm, 3.2mm and 4.0mm. The guides ensure concentrically and increase the Multi-utilisation of the diamond grinding wheel.
- Angle: 4 Angle offset: 15°, 18°, 22.5°, and 30° (30°, 36°, 45°, 60° Included Angle respectively).
- Dust Cover: Our Tungsten Grinders also feature perspex sealed for cover-safe and dust-free use.
- Cut Off Slot: For cutting off blobs if you’ve had a rare “whoopsie”.
- Diamond: Our diamond discs are double-sided for longer life, flip, and you’re on your way!
- Rotary Tool: Upgraded120V~60Hz,180W. 8000-35000RPM/min; This comes with a 6-Speed control and US charger which can be durable and used for many years.
$120.00
Excluded Tax
18 Reviews
- [Size] 0/40, 1/16″, 3/32″ and 1/8″ (1mm, 1.6mm, 2.4mm, 3.2mm).
- [Angle] 22.5°, 20°, 15° and 10° (45°, 40°, 30°, 20° Tips Angle respectively)
- [Fitment] It fits most Rotary Tools with a 3/4-12 thread including Black and Decker, Milwaukee, Bosch Dremel, and More.
- [Cut Off Slot] For cutting off blobs if you’ve had a rare “whoopsie”.
- [Diamond] Our diamond discs are double-sided for longer life, flip, and you’re on your way!
- [Brass] This comes with a set of brass knurled preset at certain degrees for different sizes of tungsten, which you can customize.
- [Rotaty Tool] It is 110V/220~50/60Hz,180W. 10000-37000RPM/min; This comes with a 5-Speed control and US charger which can be durable used for many years.
$100.00
Excluded Tax
16 Reviews
-
This Diamond wheel is compatible with our 3mirrors tungsten electrode sharpener grinder. Please check what you need is 25MM OR 35MM wheels before purchase.
- 5 x 35mm cutting discs/ Full Sand Diamond wheels; 2 x Mandrels/ Connecting Rods
- Material: Quality Carbon Steel; Disc Diameter: 35mm.
- Full sand Diamond Wheels, Wheel, and the sharping system are great to use.
- With good hardness, wear resistance, and good impact resistance. Also, can be used with your rotary tool to cut a wide variety of materials like wood, metal, gem, jade, etc.
$10.00
Excluded Tax
1 Review
- High-quality brass material, original design, and manufacture, directly replace.
- 4 brass tungsten rails: 0.040″, 1/16″, 3/32 “and 1/8” (1mm, 1.6mm, 2.4mm, 3.2mm). The guidelines ensure concentricity and multiple offsets. Improve grinding wheel utilization.
- Directly matches the four angled holes on the tungsten sharpening tool: 22.5 °, 20 °, 15 °, and 10 ° (45 °, 40 °, 30 °, and 20 ° sharp angles, respectively).
- Precise control makes the upgraded abrasive tool can grind more perfect tungsten sharp corners.
$10.00
Excluded Tax
2 Reviews
-
Size: 6 guide holes: 040 1/16″ 5/64″ 3/32″ 1/8″ 5/32″. The guides ensure concentrically and increase the Multi-utilisation of the diamond grinding wheel.
-
Angle: 4 Angle offset: 15°, 18°, 22.5° and 30° (30°, 36°, 45°, 60° Included Angle respectively).
-
Dust Cover: Our Tungsten Grinders also feature perspex sealed for cover safe and dust-free use.
-
Cut Off Slot: For cutting off blobs if you’ve had a rare “whoopsie”.
- Diamond: Our diamond discs are double-sided for longer life, flip, and you’re on your way!
$90.00
Excluded Tax
17 Reviews
- Female Cover head inside designed with a circular groove, come with one Silicone Washer, perfect match male screw and your helmet, stay tight and never worry about flying-out.
- Item surface was anodized to create a glossy film that won’t grow dark during long-time use.
- Our fasteners fit for the flip hoods and replace easily damaged plastic fasteners.
- Easy to install, the newest design comes with a silicone gasket for better fixation.
- Our Welding Hood Helmet Fasteners come in a variety of styles and colors, easily replacing plastic fasteners to make your helmet stronger and more beautiful!
$12.00
Excluded Tax
4 Reviews
- Female Cover head inside designed with a circular groove, come with one Silicone Washer, perfect match male screw and your helmet, stay tight and never worry about flying-out.
- Item surface was anodized to create a glossy film that won’t grow dark during long-time use.
- Our fasteners fit for the flip hoods and replace easily damaged plastic fasteners.
- Easy to install, the newest design comes with a silicone gasket for better fixation.
- Our Welding Hood Helmet Fasteners come in a variety of styles and colors, easily replacing plastic fasteners to make your helmet stronger and more beautiful!
$12.00
Excluded Tax
14 Reviews
- THIS ITEM IS NOT A HELMET, ONLY A PAIR OF REPLACEMENT FASTENERS
- Body & knob made from lightweight 6061-t6 aluminum. Item surface was anodized to create a glossy film that won’t grow dark for long-time using
- Fit for the flip hood and replace easily damaged plastic fasteners. Fit for fiber-metal 2090 with 3C headgear too
- Due to different helmets design, if you want to make the fasteners tighter, It’s recommended to put 1/4″ external tooth lock washers on them and they will hold very strong.
- The original design and high quality. Any questions, please contact us for help.
$11.00
Excluded Tax
39 Reviews
- THIS ITEM IS NOT A HELMET, ONLY A PAIR OF REPLACEMENT FASTENERS
- Body & knob made from lightweight 6061-t6 aluminum. Item surface was anodized to create a glossy film that won’t grow dark for long-time using
- Fit for the flip hood and replace easily damaged plastic fasteners. Fit for fiber-metal 2090 with 3C headgear too
- Due to different helmets design, if you want to make the fasteners tighter, It’s recommended to put 1/4″ external tooth lock washers on them and they will hold very strong.
- The original design and high quality. Any questions, please contact us for help.
$11.00
Excluded Tax
17 Reviews
- THIS ITEM IS NOT A HELMET, ONLY A PAIR OF REPLACEMENT FASTENERS
- Body & knob made from lightweight 6061-t6 aluminum. Item surface was anodized to create a glossy film that won’t grow dark for long-time using
- Fit for the flip hood and replace easily damaged plastic fasteners. Fit for fiber-metal 2090 with 3C headgear too
- Due to different helmets design, if you want to make the fasteners tighter, It’s recommended to put 1/4″ external tooth lock washers on them and they will hold very strong.
- The original design and high quality. Any questions, please contact us for help.
$11.00
Excluded Tax
51 Reviews
- THIS ITEM IS NOT A HELMET, ONLY A PAIR OF REPLACEMENT FASTENERS
- Body & knob made from lightweight 6061-t6 aluminum. Item surface was anodized to create a glossy film that won’t grow dark during long time use
- Fit for the flip hood and replace easily damaged plastic fasteners. Fit for fiber-metal 2090 with 3C headgear too
- Due to different helmet designs, if you want to make the fasteners tighter, It’s recommended to put 1/4″ external tooth lock washers on them and they will hold very strong.
- The original design and high quality. Any questions, please contact us for help.
$11.00
Excluded Tax
9 Reviews
- THIS ITEM IS NOT A HELMET, ONLY A PAIR OF REPLACEMENT FASTENERS
- Body & knob made from lightweight 6061-t6 aluminum. Item surface was anodized to create a glossy film that won’t grow dark for long-time using
- Fit for the flip hood and replace easily damaged plastic fasteners. Fit for fiber-metal 2090 with 3C headgear too
- Due to different helmets design, if you want to make the fasteners tighter, It’s recommended to put 1/4″ external tooth lock washers on them and they will hold very strong.
- Original design and high quality. Any questions, please contact us for help.
$11.00
Excluded Tax
- The female Cover head inside is designed with a circular groove, and comes with one Silicone Washer, perfectly matches the male screw and your helmet, stay tight and never worry about flying-out.
- Item surface was anodized to create a glossy film that won’t grow dark during long-time use.
- Our fasteners fit for the flip hoods and replace easily damaged plastic fasteners.
- Easy to install, the newest design comes with a silicone gasket for better fixation.
- Our Welding Hood Helmet Fasteners come in a variety of styles and colors, easily replacing plastic fasteners to make your helmet stronger and more beautiful!
$11.69
Excluded Tax