Tungsten electrodes of varying diameters are typically used in conventional welding procedures practiced in a wide variety of industries. During such procedures, an arc is established between the metal to be welded and the end, or point, of each electrode. The electrode point becomes worn or damaged over time, resulting in inadequate or interrupted current transmission. As the quality and efficiency of welds are highly dependent upon the condition of the electrode point, it is important that the point be dressed, or reshaped and sharpened, as needed during welding operations.

We produced the latest tungsten needle grinding tool to make grinding more simple and convenient!

INSTALLATION:
1) Unscrew top collar on Rotary Tool, and choose a correct size collet for 1/8” mandrel.
2) Install the Angle Controller.
3) Connect the mandrel with the Diamond wheel, and set it in your rotary tool.
4) Adjust the height of the diamond wheel. Screw the collet when you are sure the Below of the Long window is on the same PLANE as the top face of the diamond wheel.
5) Always wear Eye Protection, Respiratory Protection, and Protective clothing when using the Angles Controller and when welding.

PS：
Material: Made of aluminum alloy, which is sturdy and durable.
Installation problem: The new model does not need to adjust the position of the grinding wheel repeatedly. The middle cut-out design only leaves two columns, which can be installed in one step, and the grinding wheel is aligned with the slit, and the position is accurate.
PS: Our product is a Tungsten Electrode Grinder Head, you can buy a rotating tool for use yourself. We also have the full sets of tools in our store.
Our package includes 1X Grinder Head, 4X Copper Screw Holes, 5X 25mm Diamond Wheels, 1X Connecting Rod, 1X Small Hexagon Wrench.