works perfectly!
awesome to have in your tool box!

poor quality
poor quality

Worked on 2013 Civic LX 1.8l
Worked well. Sturdy durable tool. Fits oil filter perfectly. 2013 Civic LX 1.8L (Not an Si)

Not strong alloy
It was a little brittle. Should use a better alloy

Perfect fit!
Fit my Tundra well! Was able to remove the oil filter.

Low quality
Cracked on first use.

Low quality
Low quality

They work well
It worked

OK quality but do not fit my Tundra.
This does NOT fit a 2016 Toyota Tundra.

Worked as promised
Nice quality. Good value.

very stong
thanks

Tools
Work well

Works, but it is NOT QUITE THE CORRECT WRENCH for a 2016 Camry
While this filter wrench does fit over, and grab, the filter, it is NOT QUITE the correct wrench, as it does not fit deeply enough to engage the tabs/teeth on the filter housing of a 2016 Camry. Also, the comment at the description end says if the filter housing is on very tightly (as mine was!), you should use a 1″ hex socket, but a 1″ hex socket does not fit; the “nut” measures 26.6 mm, and my 27 mm socket fit loosely (I didnt have a 26 mm socket to try).

UPDATED:
After writing a review here, the seller immediately reached out to me to try to rectify my issues, offering me either an exchange or refund. When I didnt reply immediately, they got right back to me a day later. I commend them for having very attentive customer service!

Got the job done and saved a few bucks
Used the wrench to remove the oil filter from my Lexus 200ct.
On the positive the wrench has the appropriate slot placement to fit the oil filter cap and I was able to get the cap removed successfully.
The downside is the wrench fitment was a little too tight. It took a few strikes with a rubber malet to seat the wrench on the plastic oil filter cap.
Once seated i was easily able to attach my socket and the wrench didnt slip during removal.
I did have to tap the filter wrench in order to remove it from the filter cap after installing the new filter.
Overall it was cheap and did the job it was designed for.

Fits 2016 Tundra
Works as advertised. Fit my 2016 Toyota Tundra just fine and helped me get the job done easily. Fast shipping as well so i didnt have to wait to do the job.

Doesnt fit
This doesnt fit a 2005 Honda civic

Nice quality I like it
Finally got this item a week later and I am happy
Seems to be of a good quality

Handy and an absolute addition to everyones tool box
Just what I need for my 2018 MDX. I have some plastic one but this works better.

Be sure use large sized Hex socket with Tool
This is 3rd brand of this type of filter wrench I have purchased,….SUPER IMPORTANT TO KNOW …only use the outer hex shape with large sized socket to remove filter cap from these newer style oil filters!
Company should warn customers NOT to use the 3/8 socket drive square on middle of wrench , the tool will crack!

Exactly what I needed
Works perfectly on my 2014 Toyota Corolla S

Get what you pay for
The first time I tried using this, a piece broke off

I liked it very
This product is very effective for me

excellent tool
Good purchase, good product quality

Fits tight
Ive tried 2 other filter housing wrenches and both would slip off when I put the turn on them. This was tight! I had to tap it on with a hammer and it didnt slip at all, even with a long breaker bar.

Nothing
Nice

Easy use
It fits my car

Broke the first time I used it.
I went to change the oil in my daughters 2013 Corolla this weekend and it broke the first time using it. She recently bought this car and its the first time I had to change it. Whoever did it last put the filter on very tight. I didnt expect that to be a problem if I used a breaker bar. Well after applying some force to get it off, it cracked were the breaker bar went in making it useless. Fortunately a friend had one that I was able to borrow and theirs worked fine. Unfortunately I was a week past the return date. Will be looking for a better one to buy.

UPDATE: After they read this review, they said to contact them but dont really give me a way to do that that works.

UPDATE 2: They reached out to me and sent me a new one to try. Ive bumped it up to 3 stars for their effort. Ill update this again once I have the chance to try this one.

Update 3: I finally got to try it after 3 months and it works well.

Did not work
Did not fit filter housing as described.

Do not waste your money
Not for my Toyota Camry 2017 I did checked the description and it clearly stated it works but it didnt so I lost my money. Not recommend to anyone

Wont fit correctly
Can get the job done but is not right tool for the Camry.

Good item
Good item thank you

It Fits a 1999 Honda Accord EX V6 Oil Filter
Update 05/27/2020. It worked as anticipated. Encountered “zero” issues. Removed an over tighten oil filter that Honda applied six months ago. Thank you again!

This cap wrench is meant for a 1999 Honda Accord EX V6 engine. I had gone to my local auto store, and they didnt have the oil filter cap wrench that would fit snug. I contacted the Honda Dealer to get the proper specs of the filter used. Of the six cylinders vehicles that I have had in the past, this filer is very small. I learned that is is important to count the number of flutes on the filter.

I did find the pictures posted for this post a little confusing. The filter cap for sale is displayed, and below that indicates “vs” and the oil filter cap wrench looks identical, but is broken. The section were you insert the sock wrench is broken off, and the tab(s) are broken.

i havent used wrench cap as of yet. But once used (this week), should I encounter any issues, I will let the seller know in a timely fashion. People (Buyers) have a tendency of waiting too long in contacting the seller or to initiate a return.

Poor quality
Poor quality.

pHENOMENAL
tOP NOTCH SELLER AND PRODUCT

It works
I have tried several wrenchs but this is the first one that worked without any issues.

Don’t buy it
Well the fit was great. But never got one filter off with it broke on the first use.

Fits 08 toyota tundra 5.7l
After searching high and low for the correct one for my 2008 tundra found this one and it fits like a glove

Excellent
Excellent

Excellent
Easy to use for my toyota corolla 2016, if I could, everyone can.

The most importand thing is i can use on 2 different vihecle
I really like it

Garbage
Junk!
Got stuck. Not a true fit. Absolutely garbage.

Awesome
Great tool for the job.

Worked well
This worked good for my 2015 Honda Accord. It is tight where the filter is accessible so this worked great.

Fits a 2018 highlander
You wouldnt need this filter wrench if the people at the dealership wouldnt use impact wrenches to put on your oil filter. But they do use impact wrenches to place your oil filters so you need this tool.
I had to use a Milwaukee 20 V half-inch impact to get my filter off and this socket stood up to the beating.

Works perfectly!!
Tool was awesome and less than half of what the parts store was charging. The only issue I had was the filter casing was stuck and the tool kept slipping but I dont think it was the tool rather the previous oil change that was done was over tightened.

Fits and works On 2017 Tacoma TRD Sport
Works as advertised. Fit my 201 Toyota Tacoma just fine and helped me get the job done easily. Fast shipping as well so I did not have to wait to do the job.

Not
Cracked in half on first attempt to use. If your oil filter cap is over tightened this wont work.

Good
Works great. Fits my lawnmower and my Honda Gold wing

Perfect
Works great

It works
The fit is very tight. So tight I had to apply some lube to it so it would go on. Once it is on the canister I used an impact wrench to get it to turn. Worked perfectly without damage to any parts.

Close quarters to remove filter.
May fit actual Honda brand filter, but does not fit Fram 7317 filter specified for car. I now have 3 “cap” type that will not remove the Fram I have use. Next oil change I am waiting for the $29.99 dealer special and then will see if this works for the following change. Got a claw type that I can probably fit at some point.

Fits filter properly with no slop.
This product rocks. 64 mm, 14 flutes, 3/8 socket to remove and replace. Fits the filter perfectly. Aluminum construction; no rust. Fitment for Acura MDX.

2015 BMW X3 oil wrench
This oil wrench worked well on my 2015 BMW X3

Quality product
Great price

Oil filter cap
ok

Top quality
It feels solid and well made. Fits the filter perfectly and is easy to use.

Great solid product
I forgot to take out my last oil filter wrench off the oil filter socket the last time I did a oil change on my 3G Prius. So it fell off and I lost it… this is my replacement and it seems to be a solid buy

Great for Honda Oil Filters
Great tool to loosen/tighten oil filter(s) on a 2011 Honda Odyssey!

Buy it!
Just get one!

Exactly what I needed
Was perfect for removing the oil filter housing on my 2015 Toyota Sienna.

Not what was suggested
Did not work for my truck

This wrench help up to 200lbs of torque….great aluminum casting. 26mm socket. Used on highlander
The shop I bought my 2016 Highlander over-torqued the cap (had to have been an impact wrench) to at least 100lbs. I had to turn up my impact wrench to the 150-300lbs setting before the cap came loose! This version of the filter wrench socket accepts a 3/8 square drive or a 26mm socket. I put about 60lbs on the 3/8″ drive with a breaker bar and the wrench did not fail. I then tried my 1/4 150ft/lb impact. It wouldnt budge. The 26mm socket and the variable impact wrench (1100lbs take off) got it off and the wrench has minimal wear from the ridiculous job that was required to free the (factory 25 ft/lb spec) aluminum oil filter cap. Its a well-made filter wrench/socket with a thick design and good quality aluminum and casting.

Making the work easier
my first oil change on my 2005 Element,
It became a challenge,
I couldnt get it off. I tried
Different oil filter removers. The limited space and the tightness of the filter made it a challenge. as you can see in the photos, I tried putting padding on one of the oil filter removers because it would not grip to remove the filter. Eventually I was able to remove it. now the second time around, with this tool, it made the job a breeze. I can even use it on my Accord.

Should Have Purchased Toyota Tool
2017 Toyota Tacoma TRD Off Road: Athough this tool did the job, it was difficult to get a firm grip on the filter housing. Had to push it hard against the housing with one hand, while pulling the breaker bar with the other. A more expensive Motivx or Toyota wrench would be my recommendation for the aforementioned truck,.

Worked as expected
Easy to use, seems pretty solid and the price was fair.

just ok
did not fit real well but was able to make it work.

Fits 2018 Toyota Tacoma
Tried it based on the size that I need for Toyota n Lexus filters. Managed to take out a tight filter that dealer always tightened too tight. Likely by an impact gun. Used a long 1/2 drive breaker bar to remove cap but did not damage it. Was so close to give up but after the third try I broke loose the cap. Wrench remain intact no damage. Just a wear mark on the socket drive. Happy to have it

Perfect fit for a 2012 Toyota Prius,
Perfect fit for a 2012 Toyota Prius.
Oil filter removal was easy.
Fits snuggly so a little jiggling to remove from filter cap.

It broke on first use
It broke on its first use. I was able to return it. So I guess thats good I guess.

This works perfectly!
This works great! You almost dont need it as you dont tighten much past hand tight.

Oil Filter Wrench Oil Filter Cap Wrench Compatible with HONDA ACURA (Custom) Durable
This wrench fit with OEM Honda oil filter ,good to use

it works.
its an ok product.

It got the job done
Fits well gets the job done

Great for getting a filter to spec
Great for getting OEM motorcycle oil filters torqued to anywhere from 13 to 19 lb-ft. Havent tried any higher torquing and havent tried removing filers with it as Ive seen other reviews have thiers break. Just going to use it to torque filters to specification! I feel like it would hold up pretty well for most things if you used the 27 mm socket to go over the whole turning nut, but I would also say its not for breaking loose stuck filters.

Worked great
Car

It works!!
2012 Toyota Camry.

Already bought it.
My hand is better removing the oil filter compared to all you mafaka.

good investment
good investment

Happy father.
My dad loved it because he loves tuning his cars and when he changes the filters he gets desperate, so I decided to buy him a key and he was fascinated.

This product performed much more efficiently than a cheaper version that I had picked up at WALMART where I had also purchased motor oil and a filter for my wife’s ‘13 Corolla.
Incidentally, the cheaper version cracked and eventually split in two!