3mirrors Harmonic Balancer Installer Crank Compatible with GM 1997-Up LS1/LS Engines Crankshaft Installation w/Thrust Bearing 551141
39 Reviews
In Stock
- LS / LT Harmonic Balancer Install Tool Compatible with all GM LS & LT series engines 1997-current (Gen 3, 4, & 5).
- The Harmonic Balancer Puller Comes with a thrust bearing, instead of the flat washer, also higher hex end makes the installation easier, tool threads into the crankshaft and pushes the crankshaft pulley into position
- 10.9 steel upgraded manufacturing craft, the screws and the stud rod are smooth connection and not easy to get stuck, Add Lubricating oil will be more perfect when used!
- Good quality and worked perfectly, Much safer than pulling on the balancer with a bolt.
- This With Bearing version is recommended for professional factory results and the ability to perform any volume of installations.
Bearings
Bearing balls fell out can¡¯t use anymore
Jake Sternon September 17, 2018
Good quality
This made installing the hub a breeze. I would recommend getting this, also I used my impact with it and it was fine.
Jeffrey Hageron October 1, 2019
Well worth the money. 🙂
It shipped fast and it was what i was needing for the good price.
Colin Campbellon October 15, 2019
ok
ok
larry mccallon November 22, 2019
2.8
Good product but does not the 2.8L in the 06 CTS.
Connor Vega morganon December 9, 2019
Easy to use
Worked great
Charlie Calhounon January 9, 2020
GOOD
Pretty legit for the cost
B. HUTSONon January 12, 2020
Great tool
Worked perfect on my 2004 corvette,made installation of my harmonic balancer a breeze.
victor floreson February 2, 2020
Properly fit a GM 4.2L inline 6 on 2002 Trailblazer
Worked perfectly for me on a 4.2L inline 6 on a 2002 Trailblazer. Greased up the washers and threads of rod where nut would travel (not the portion threaded into nose of crankshaft) and pulled new damper on without any issues. Rod backed out of crankshaft afterwards with ease. Money well spent!
dgmon February 4, 2020
Pulley install
Product is very sturdy. Install was very quick.right tool for the job
Franken Rodson May 7, 2020
Quality product, great price, easy to use!
Great inexpensive tool to re install a harmonic balancer. Its much longer than the bolt for an LS6 (pictured) so I was able to place the balancer on the shaft and then install the tool with extra length to tighten the balancer down. It was a snap to reinstall with this tool. Without it I would still be wondering how to complete the job. Be sure to grease or lubricate the threads where the nut is so you dont damage the threads. I also lightly greased the washers.
Sean L.on May 16, 2020
LS engine balancer installer for great price.
Harmonic balancer installer for ls engines. This tool is cheap and worked perfect for installing my balancer during the cam swap on my 2001 Silverado.
Matthew V.on May 23, 2020
works perfectly
Very simple tool. Works great
Clint Lewison July 24, 2020
Missing part
Edit: This balanced installer works well, and I like the thrust bearing. The seller contacted me and reimbursed me for the cost of my hardware store trip. I would still recommend checking for all parts before starting your install! My new balancer is on, so Im happy.
This is not super useful without the flange nut. I dont want to delay my project by waiting for the seller to ship just a nut to me, so off to the hardware store.
CHECK FOR ALL PARTS BEFORE STARTING!!!
Craig Lon August 23, 2020
Worked great
Worked perfectly. Helped me finish the job quickly.
Krison October 18, 2020
Great tool and easy to use!!
Great product, very easy to use and set up. Think thats the fastest Ive ever set a balancer. Set the stud well, oil the bearings and washers – very important for an easy install. Well priced!!
T-Bone Stalloneon October 30, 2020
worked
This was a time saver replacing the balancer on my Trailblazer.
Frankon November 2, 2020
Keep it oiled and use with good wrench set
Worked as expected. I kept the rod from bottom the crankshaft and then wedged the 13mm rod end wrench against the power steering wheel. Worked like a charm. The elongated nut is a nice touch.
X_Vaqueroon November 12, 2020
Did not fit
It did not fit on my Chevy silverado 2003 1500 4.3L. Too big
Phillydon November 16, 2020
To short
The shaft is way to short to pull a ATI or truck balancer on. This product did not work on my 6.0L LQ9
1fast68on December 25, 2020
Great!
This worked great for putting harmonic balancer back on my LS engine
Greg M.on January 10, 2021
It works great
It works great, worth the buck
Jose Casillason February 20, 2021
not worth the money
I used it one time and the ball bearings fell out not happy at all
Cindy Dickersonon March 20, 2021
Unusable garbage
I ordered this for the LS2 (L77) engine i was working on and need a harmonic balancer install tool so i ordered this one. It has a lot of good reviews but when the item arrived it was bent and couldnt be used without damaging the crankshaft on my engine. if you need a harmonic balancer installation tool go to AUTOZONE, they have one for rent and it works perfectly.
david m.on March 21, 2021
Great harmonic balancer. Bolt
Great made the job real easy balancer went on fast.
Maria karyson March 25, 2021
Worked Well
Worked well installing the harmonic balancer on my LS engine.
Pythonon April 19, 2021
Worked perfectly
worked perfect to install my damper on my LS engine would buy again but dont think Ill need to.
John Hon June 13, 2021
Junk tool.
Washer Included were junk and bent first fi.s using the tool. Causing the tool to strip the threads well backing it out.
Not reliable or worth the money. Could have caused my to have to replace the entire engine
Jason B.on June 13, 2021
It works don’t expect daily use it is cheaply made
It works. Cheap
wes harrisonon June 17, 2021
Worked excellent. Rember to lube threads!!
Pretty simple tool, but works well. Yes you could make one, I could make one. Decided to purchase it along with some other ls specific tools.
Installed new balancer on 6.0 ls no problem
Remebr to lube the threads as with any puller/installer tool
Chad Hoffmanon June 24, 2021
Great product
Must say for the price it was great it did the job
Rafael Navarroon August 11, 2021
It worked
Worked on my L86. 2015 Silverado with the 6.2.
We The Peopleon September 29, 2021
Great tool
Great tool but the ball bearings broke on first use. Can still use till without bearings.
Michaelon December 7, 2021
Works flawlessly
Works flawlessly
Jacquelynne Meyeron March 8, 2022
Works
All the people here saying it isnt straight are completely correct. Its got a bend to it. But its cheap, and the bend isnt bad enough to do any harm. Just be smart about the threads and make sure nothing is galling or malformed – stop if it feels wrong – and it works fine.
I got an ATI SuperDamper on the front of a GenV LT1 with this easily.
My local AutoZone didnt have one to rent, so this is the next best thing in the cheapness department.
Extra star for the nice threaded hole in the end for a hook to hang it on the wall after youre done.
J. B.on March 12, 2022
Bearin is horrible
The bearing came apart completely with first use. Didnt even get to install the balance. Didnt go 1/4 of the way before it was broken
Ivan Hernandezon April 6, 2022
Good value
Not highest quality bearing, but should work several times. Use lots of lube.
Daveon May 9, 2022
Seems perfect, but cheap materials make it a waste
I needed to install my super damper so I bought this while ordering some other stuff. It fit well and seemed like it would work, but when the damper was about 1/3 of the way pressed on, the bearings completely disintegrated in to almost powder. I borrowed another, more known brand of installer, and the new balancer went on without issue. So dont waste money on this. It isnt made strong enough to do its job.
Sean Bubeckon May 18, 2022
Works great!
Installed my balancer on my 5.3 no prob
Christopher Marookianon June 23, 2022