3mirrors ALUMINUM Tungsten Electrode Sharpener Grinder & TIG Welding Rotary Tool 24 Guides w/Safety Housing & Cut-Off Slot, Multi-Angle& Offsets
18 Reviews
In Stock
- This grinding tool with widely applicable sizes. The Lastest design is available for 6 sizes of tungsten needles: 040″, 1/16″, 5/64″, 3/32″, 1/8″, 5/32″ (1mm, 1.6mm, 2mm, 2.4mm, 3.2mm, 4mm); Each size can grind 4 tip angles: 15° 18° 22.5° 30° (30° 36° 45° 60°).
- It is very light and convenient. But very strong and precise. All holes are stationary, so we can set an offset compensation for each size hole to make sure all tungsten’s tip center is on the grinding center point, this offset can ensure that the lines on the tip of the tungsten electrode are as straight as possible. If the hole position is variable, offset compensation cannot be set.
- The tungsten sharpening tool also has tungsten cut-off port processing. After the tungsten you are using is worn or contaminated, you can use the cut-off port for cutting so that you can use it again. Besides, A Flat Grinding Block is specially designed, can be used to grind a flat tip vertically, for use if needed.
- All holes are designed to use the same height as the diamond wheel. Needn’t set the height again and again. Very easy to install and use. Save your ready time for welding, Welders deserve it! Product made of Upgrade aluminum alloy material, CNC finishing more Durable, there will be no trouble of high temperature melting.
- This tool is essential for real professionals. We know welders, so we know what they need. Welders are very particular, pursue perfection. But some of them forgot health. Innovative design! This tool comes with Dust Housing, is easy to collect and process tungsten powder, also can protect you away from tungsten dust. The kit comes with Rotary Tool and a small storage bag.
Hand rotate while grinding.
Customer service for this tool is outstanding !!! I had a small issue , they swiftly responded and corrected it !!! Im impressed! This tool is conceptually excellent for any tig rig!!! If you want to save time or are sick of hitting the ol bench grinder ..give this tig jig a spin on your rig for any gig!!!
Donnyon April 13, 2021
Best Solution for the Money!
This version just works. The diamond wheels seem to last quite well (I just sharpened sixteen 3/32 Lazyr tungstens with no wear shown). This seems to be the cheapest, purpose made tungsten sharpening solution. Fits all sizes of tungesten and sharpens them to any one of for angles for super pointy to more blunt cones.
Mr. Smithon June 10, 2021
So nice!
I think for the money this is a great buy. So many nice features. Easy to use.
Billon June 14, 2021
Easy setup and use.
Nice, simple to set up, easy to use. Hangs up next to my welding bench. Im new to TIG so it gets lots if use. Sure beats walking to the bench grinder. As far as durability, dont know yet. Just got it days ago.
Sasha Francioneon August 1, 2021
Hard to beat for the price
Works well, grinding disks arent the highest quality but still get plenty of use out of em before their worn out, dremel style tool and tig grinding jig work well…….definitely worth buying if your going to start tig welding.
brandon boyetteon August 23, 2021
Good quality
Works as described, good quality product.
KPMon September 22, 2021
Great tool!
Grinds perfect tungsten! Really like the coded system.
Eric R Thompsonon September 23, 2021
Beautiful CNC part, mediocre disks and an appalling power tool
This is a tale of two sides. The alluminium circular guide is beautiful. The disks work well but are cheaply made and dont run very true. The dremmel clone is dire, its hugely noisy and the speed control is virtually useless. Other than as a paperweight I dont see a use for it. On first turning it on it ran so far out of true it gouged a nasty groove in the main component. After fitting a proper dremmel and working hard on the alignment of the mandrel and disk it at least ran without chewing itself to bits. Whilst hand holding it was difficult to use and seemed to suck the tungsten into the unit but this was caused by vibration. After mounting the cnc guide in the vice (not the dremmel) it worked well and I sharpened about 25 tungstens with no need to slow down.
So, if I hadnt needed the 2mm hole one of the alternatives would have been better. The cnc main part is great, the mandrel is ok, the disks are poor in both flatness and true running but work. The dremmel clone is a disgrace and is not fit for purpose
Ian Birdon September 29, 2021
Great tungsten grinder
As a typical male, I opened the package, put it together, used it, and threw away the manual (oops- forgot to read it!) Yup…it is simple and perfect for a lower priced tungsten grinder. You could pay more…but why?
Blue Christmason October 9, 2021
Good quality and fast shipping
The quality of the item is very good, the operation is very simple, and it solved my problem perfectly.
Michael Rosenlofon October 16, 2021
great product
Lots of angle options to meet my needs.
Chris Hayneson February 8, 2022
Its an ok grinder
Like: It dress up the tungsten ok and
shipping is fast (Prime)
Dislike:
1. The tungsten needs a hard push to get into the hole.
2. The cup gets really tight to remove and put back.
Verdict:
The hole for the tungsten needs to be improve so you dont need to fight to get it in. The cap cover needs to be modify.
Arenceon February 14, 2022
Great tungsten grinder!
This tool works great, I really like it!
Jeff H.on March 16, 2022
Not worth the money
Used it a hand full of times and the front bearing locked up, only saving grace is besides the tungsten jig all it is is a dremal like tool
nathan beardenon April 7, 2022
Excellent
Excellent professional
Dolphinon April 30, 2022
Great product
seems to do the job
tlyonson May 26, 2022
The dermal tool is garbage, the motor went out
The motor on the tool is garbage. Now its past the time of return so its worthless. Do not buy. Just buy the attachment for the sharpener. Do not buy the combo.
JKon June 22, 2022
Youll get what you pay for.
It works great on new tungsten. Once the tungsten is slightly damaged it will not fit through the guide hole. The fact that this tool doesnt have a cutoff option makes this a real problem.The diamond discs are really poor quality.
dan w carmichaelon July 17, 2022