Good, but Overpriced
You know an item is overpriced when it comes with a ridiculous storage/carry pouch.

Great
Works great. Very good value.

Not bad if you only want one angle
No additional angles.

Works fine and accurate easy to use
I wish I would have had one a long time ago

works like a champ
grinds tungsten electrodes quickly and accurately

Good product, solved my issues
This comes with brass knurles preset at certain degrees for different size tungstens. My first use of this, I used the 3/32 in its original spot i think 20, it was way to shallow of a bevel for my preference. So I took a look at it an realised the knurles have an allen head and can be interchanged. I switched the 3/32nd knurle for the .004 knurle position and got the bevel I like on my tungsten. Also you have to use light pressure (almost just barely touch and spin) on the tungsten or youll get a rough grind on the tungsten. I like this product now that I am getting the results I want.

Nice tool for grinding tungsten electrodes.
This is a well thought out and designed tool. Makes grinding new or regrinding used tungsten electrodes a snap. I got the aluminum kit as I read that the plastic one could get hot enough to warp or melt. Maybe so, but I am very pleased with the aluminum grinder. Nice tool for the hobbyist/DIY TIG welder.

Easy and convenient
I was using a belt sander or a green wheel to sharpen my tungsten until I saw this. I have an old Dremel that was showing is age, so I attached this sharpener, and it works great. I dont have to get up to renew the tip. Its very easy and very convenient, and a lot cheaper than other sharpeners.

Im happy with it
Great tool.

A little pricey but it works great.
I was a little skeptical of this product but I like the fact that it attached to my dremel. It works very well and it doesnt take long to sharpen the tungsten as i thought it would have. There is even a spot to cut the ball off the end so it will fit through the guide. Over all it was a good purchase.

It takes a little time to grind your electrodes, take your time.
It surprised me, it works very good for the size, I would recommend this for a good supplement for the very over priced grinders.

Easy
Very easy to use.

Very efficient and quick in getting the proper point for tungsten electrode.
It really does make a difference to properly sharpen the tungsten electrode for tig welding. This works quickly and easily to get the proper point. I find with a proper point the tungsten requires less sharpening and the heat is directed more consistently. Good product.

Works great
Works great

Solid unit, annoyances are minor
Pretty good little unit. Had to run a bit through the 1/16th as it was blocked and the set screws dont really like coming out to change angles, but it has done a fine job so far.

Great low budget sharpening head
Good product minor issues such as brass alan keys stripping out very early and cheaper diamond wheels wear out a little quick other than that great outcome

Awesome tungsten sharpener
Works great

Easy As, 1, 2, 3!!!
Nice thing about this product, its manufactured from billet aluminum, unlike most others similar in design, which are made of plastic. This part costs approximately twice as much, when compared to the plastic counterparts.
Only downside is that I would have preferred it to have TWO dedicated, separate angles (each) for 3/32 and 1/8 inch Tungstens.
I also purchased a newly released DREMEL model, rechargeable “DREMEL LITE”, about $50.00 and dedicated this tool solely for Tungsten sharpening.
Overall this tool does exactly what its intended for. The cut-off section is a bit slow, but that might be do to the supplied diamond wheels. I do recommend getting extra cutting wheels, as they wear fairly quick…

Cant use it with out the grinder motor?
There was no motor or grinder included are those sold extra where will I find this ?

Great product!
This is a great product & I would highly recommend it to anyone who is doing any amount of tig welding.

Happy with it.
Easy and consistent to use. Cost more than you would think with no motor, but they all do (its right in the rest of the others pricing). No motor so you can pick your own preference. Does connect to the Milwaukee cordless very easy. Grinds down the tungsten.

Great product
Works great Good time saver!

Looks promising, but save your $ for a proper unit.
Another pro welder that does side work out of my home shop, looks like a good value for the money but it isnt. The main problem is that it uses the very very edge of the wheel to sharpen the tungsten. If not forced over to stay on the wheel, it will sharpen the tungsten with an off center tip.

But if you do achieve a nice tip, unfortunately with it being ground that far on the edge of the wheel you end up with a swirled grind pattern. The same one the put on the description that you want to avoid.

Just what I needed
Perfect point.

Great tool
I have wanted a cordless tungsten sharpener for quite a while, but wasnt willing to spend $400 + for one, a friend at Praxairs showed me the one they sell and sure enough the motor is built by Milwaukee, I found this head unit for $90 and bought the m12 die grinder and now I have the tungsten grinder I wanted for $150, it works wonderfully, and being cordless I can put it in my field welder kit and use it anywhere

does what it is advertised as
worked great everything was as advertised but did not fit my Ryobi grinder had to source a dremel tool one less star cause of price but thats just me

Damaged threads
The threads that screw onto the Dremel grinder are damaged. I will have to buy a tap to repair the threads before it can be used. Other than that it appears well made. There is no seller contact information in the package.

Good for convenience
Its really good with smaller tungstens, although for 3/32 it is a little weak.

This is good for not needing to get up everytime you stick a tungsten, although the bench grinder equipped with a diamond wheel plus a drill is much faster at 3/32.

There are a couple weaknesses I noticed right away, there is some play in the bores that makes it easy for the tungsten to become lopsided when you turn it by hand, and there is some flex in the diamond wheel that makes it tricky to get a consistent grind all the way around, but I just sharpened 3 x10 packs of tungstens in about 15 minutes and Im happy with the results.

great tungsten grinder for the money
This grinder came in handy since school is out works great with minor changes , fit my black & decker RTX perfect grinds great at high speed & changing 2 of the holes for grinding, wont have to get in line at the grinding wheel now to sharpen my tungsten

Great but the smallest angle wont work.
The tungsten is outside the disc on the smallest angle. But other than that so good.

Good Tungsten Sharpener.
The sharpener came in great shape and performs well. The only thing i can gripe about is that it took 20 days to get here.

This is not a grinder as adverstised.
Caution, even though the pictures show a grinder and its advertised as a grinder, it does not include the grinder. It just includes the attachment that goes on a grinder.

Tres pratique
Affuter mes tungsten

great tool you will be amazed
works great I have never had a nicer point and precise arc and very easy to use

Handy little tool!
Handy little tool.

Quick, good tips
Bought this because I was sick of hand grinding my tips. Gives good accurate tips consistently. I put on my milwaukee M12 rotary tool. Set it on 2.5 out of 6 speed, does awesome job. I just leave it on there as a dedicated tungsten grinder. I bought this one verses the one with 40 holes in it, so can just have (1) 3/32 Hole- no confusion. If anyone has a hesitation on buying a tungsten grinder- like I was? Dont be- you will be glad the first time you use it!
Update:
You can move the 3/32 brass guide to any of the 4 bevels you want. The way its marked is deceiving.

calidad!
Muy cumplido lo recomiendo

edited review
After voicing my displeasure with the shipment of the sharpener, I was offered a replacement.
Today I received the sharpener and I am happy with its performance it is every thing as advertised. I like the four different angles that you can grind on the tungsten I am also happy that they stand by their product. I would recommend the grinder.

As advertided
Worth the buy, saves you a lot of time!

Good for the price.
Not a bad little sharpener. The body is well machined and solid aluminum.. the instructions it comes with are horrible. Talks about installing o-rings and dust shield. Non of which come with or are part of this unit. Might have been for an older or newer design ??
But functions well. I sharpened 20 – 3/32 with no issue and quite fast. The diamond blades are on the cheaper side but do the trick. Nice part is if you do it over a bucket there is no shavings all over.

Quality
Outstanding, safe, and fast tool

Dont buy it
The product wouldnt fit a die grinder that I have . Had
To order some cheap rotary one and the threads didnt fit in there properly. They didnt send a proper adapter to hold
The tungsten sharpener . Sharpening equipment really cheap

all of product not there
so it had fast deliver but no parts no instructions even no name on or in box
very disappointing

Versatile
Excellent tool

Vibration
Works good. Lots of vibration from blade and arbor not being true.

If I could give it more than 5 stars I would
I do a lot of TIG welding and fabrication at my work shop and I used to always sharpen my tungsten on a bench grinder. It got really tiring fast! Once I got this tool I really liked how simple it is and how well it is made.
It screwed right on to my dremmel tool and I put it to work right away.
You have to be careful not to break the carbide disc while putting it all together.

Once I got it all installed and set up I tried sharpening some tungsten electrodes. It has slots for all kind of different sizes. I mainly use 3/32 so i tried it out. I was amazed on how fast it sharpens the tungsten and how precise it does it also. Perfect tip and angle always! I sharpened about 8 at a time this way I dont have to sharpen them every time I need one or I accidentally dipped it into the weld puddle. All you need to do is just spin it with your fingers. No drill is needed at all.

This tool really is worth having. I would never want to sharpen tungsten on the bench grinder ever again after using this tool.

Works well on new electrodes, more challenging with used ones.
The brass inserts are just the right size for brand new electrodes and they are sharpened in no time. The directions dont give any speed recommendations, but the lowest speed on my older Dremel seemed to work fine. The unit itself appears to be very sturdy and should last a long time.

Resharpening used electrodes is somewhat more cumbersome. Even if the tip is not balled, they appear to expand just enough from heat that you cant fit them into the correct size insert anymore. You have to move up a size or two and grind the tip back down to a size that will fit in the correct insert. Not mentioned in the minimal instructions that comes with the unit.

Wrong/too loose fitting
3/32 fitting is extremely loose. Cant find sellers contact information to get replacement fitting. Will happily change my review if I can get the correct fitting.

Not machined correctly
Doesnt fit the tungsten it indicates, holes are too small. For the money it should work! Also doesnt fit my dremel.

It gets the job done. Update…..
installed in my dermal quite nicely, the aluminum body is machined clean . the only thing that prevented from getting 5 stars is the guides were machined with a little too much clearance. they have some slop and that is the only reason it gets 4 stars.

Update :
ended up returning it too much sloppiness in the guides. will just get a proper sharpener.

grinder
was ok

Doesnt fit a dermel like they said
I put it on my dremel and it screws on ok but the grinding disk is way above the location where it needs to be. I cant put the cutting mandrel in another further to lower the disk.

TIG
Great little Tungsten grinder, need I say more.

The grinding wheels only work for one sharpening
I liked the idea of this, but when I needed to sharpen a Tungsten rod it only worked for one sharpening on a particular rod diameter.

Needs to be redesigned
Grinds the tungsten swirled just like it says it wont, and I took the guide screw out to move it to another spot and the threads are trashed, but it does have a lot of potential and grinds tungsten very fast, I just think its poorly built for the price

Its not the whole tool its just an adaptor
For the price I was expecting the whole tool, not just an adaptor for a dremel

Should have bought this a long time ago
Works perfect and saves a ton of time, especially for a new welder.

Waste of time and money. Tungstens DO NOT FIT!
Waste of time and money. Tungstens DO NOT FIT!

Piece appears well machined but tolerances are off and is not usable.

Great tool
works great

Works waaay better than expected.
Did a 10 pack in about 4 minutes. Good use of $80. If a DGP-PG3-A Piranha III is considered the standard and rated a 10 on a 10 scale. I gotta give this a solid 8, and having it right there next to me on my Milwaukee 2460…that makes it a 9. If your over 50, maybe not a Raquel, but certainly a Jacklyn…

Welding.
This makes sharpening the sticks easy.

Great piece of tech
Works awesome, but not so much if the stick gets splatter or you dip it as it wont fit in the hole anymore. You have to grind the corruption off first. Not really a big deal at all and it does such a great job so quickly its still totally worth it.

Dont waste your money
Does not come with the rotary tool and would not fit my milwaukee die grinder. Had to buy the rotary tool seperate, putting this at a total of over $200. And it leaves the swirl marks that it says it will not. Tungsten doesnt spin nicely in the tool either. Save your money and just buy the eastwood grinder.

fast
its fast and convenient right there at my welding area. Makes a consistent point every time

Works well
Works well

Become self reliant!
This product works perfectly for my needs in having my own tungsten sharpening device. Welders can get really salty when sharing a grinding wheel which is why having this product gives me more self reliance and saves time in not making unnecessary trips to the grinding wheel. The aluminum housing is thick enough to survive being dropped. The angled guides are interchangeable to allow customizing angles easy. As long as you read the directions that come with the product and DONT JAM THE TUNGSTEN ONTO THE DISC, they last quite long. I use 1/8 gold for TIG welding aluminum and have not yet had to replace the diamond disc.

Let someone else complain about grooves in the grinding wheel and get a consistent tip every time!

Worth the money
Worth every penny.

Works
Works great you cant move the copper screws is the only downside.

Need better support nice portable tool
So The 1/16 hole for tungsten to small , using Raynor brand wont slide in also could find no information to email for help or order additional grinding wheels , nice concept wish support was more available would like to order and additional brass guide to machine correctly to fit 1/16 tungsten

Good idea & tool
Works great. Have only used a few times since purchase. Will give a good run through when I get my new tig welder online & then will update.

It looks good.
So far I like it, but I havent used it yet, so I cant really say anything negative about it.

Perfekt!
Endlich ein Werkzeug mit dem man die Elektroden einfach schleifen kann. For die 4 Elektrodendurchmesser von 1,0 bis 3,2 mm stehen 4 Buchsen zur Verf¨¹gung. Diese wiederum k?nnen in 4 Gewinde verschiedener Winkel eingeschraubt werden. Der Schleifvorgang l?sst sich gut beobachten. Die mitgelieferten Diamantscheiben und deren Aufnahme sind von guter Qualit?t. 100%ige Weiterempfehlung.

TIG Tungsten Sharpener
Great product. The accurate grinding angle has made a huge difference to the ease and quality of welding.

Fit right on my Dremel tool & grinds very nice
Welding is not my profession but good quality welding is important to what TIG weld. Proper grinding angle and grind direction are important to achieve the best welding results. I have hand ground tungsten for years without the aid of a fixture so I decided to try this adapter for my Dremel tool. Right away I noticed a more controllable and stable arc. This adapter is a nicely CNC machined aluminum anodized tool and for the price I would give it 5 Stars

works
makes a good tip

Good product but wont fit all Dermel tools
Looks very well made. However will not fit a new Dermel 4300. Its thread does fit the Dremel tool attachment however the Dremel collet length is too long to allow the grinding disk to sit at the required slit location. Result – cannot sharpen the tungsten.

Expensive but convenient.
Keep in mind that is is just the fixture, you still need a Dremel or similar too to run it.
I am now seeing that the supplier sells another version that is almost 50% less and I am not sure what the difference is.
Seriously considering trying the other version as that is a substantial savings.

good unit
a little titer on tungsten but perfect grind

$95 is insane! You guys need to start wearing respirators over there
LOL! Great idea, for learning (only). Ive been welding for many years and I have to say that this is a very nice concept but for that price, you gotta be kidding me. I know plenty of old school welders that would have a heart attack if they saw the price on this thing. Not to mention youd be the laughing stock and probably get sent home for being too slow, if you pulled this thing out on a job site. This is like buying a jig to show you at what angle you should brush your teeth. Yeah sure, cool, for a week. Unless you are seriously OCD, this tool is useless after a while, your hands will naturally hold the drill (on slow speed) at the same angle every time. Just like walking or even welding! The price for this thing is just ridiculous, nope, sorry. $29 max! Btw, doing it with your hand just takes more concentration so you dont end up with a flat spot. All you gotta do is make sure your fingers are rotating the electrode before and after you touch the grinding wheel. Use a drill on low speed. If youre on a grinding wheel, itll only take you a dozen electrodes or less to perfect it. For reference: Dec 2021

Not full range of angles
Beginner here, bought this in error and dont recommend it. Others have commented on the sharpening direction (swirl). This seems constructed well, but its not as useful as desired, the angles on this are too low–no way to get a 45 degree point, for example. Ended up buying a more professional model elsewhere.

Works as designed
Got nice sharp points on the tungsten. Works fine for me. Would be nice to have a clear plastic shield on it. I use a respirator and run it outside the shop

Surprisingly good
works fairly well.
I was surprised
went on a Milwaukee dremel no issues
diamond wheels last very long to my surprise
nice sharp tungsten

Tungsten sharpener
This device is a little speedy but will last a long time. Works great. A time saver when sharpening my tungsten.

FAST AND PERFECT
This is so quick and accurate. Sharpen 30. In less than 5 minutes. All perfect

Overpriced for the quality
Well overpriced for what you get, however probably one of the cheapest solutions for sharpening tungsten with a rotary tool. This tool does work, and will get me by until I can afford a quality tungsten grinder, but I really wouldnt recommend spending the money on it. I had to drill out the 3/32 guide before an electrode would fit in it (tried multiple brands of tungsten). The grinding disks dont seem to be flat either, causing a lot of vibration and a un-uniform grind. Not impressed with this purchase, but getting by with it for now.

Not worth it
It was really small. It was cheaply made. And for the price i had to return it. I purchased a nice bench grinder for the same amount of money.

Works Great
Wish I had one of these many years ago. Makes sharpening your tungsten so much easier

easy and fast
Seems a little expensive for such a little thing, but well worth it.

I used to use a diamond disk mounted on the side of a grinder wheel. This is so much better in terms of speed and accuracy of the point. The cutoff to take care of removing contamination is also better than the way I used to just grind it off on a wheel.

I bought a remanufactured battery powered dremel to mount it on permanently and the setup works very well. There are a lot of dremel clones that would have been cheaper , but they dont have the threaded head.

Does what it says on the tin
Excellent piece of kit

Wouldnt fit
Tried to mount this on three different hand held rotary tool. Two different Dremel models and another unmarked brand. Could not adjust grinding wheel low enough to use. Sent it back. Wouldnt recommend buying.