Feature:
Before purchasing and installing, please confirm the compatible model, compare your original oil dipstick handle, verify the size of the hole, etc.

Installation Tips
1. Take the old broken handle off from the Dipstick end, maybe you need a little pin to push the roll pin out.
2. Use the 2.5mm HSS Twist Drill to enlarge the 2mm hole to 2.5mm on the dipstick end. You can mark if needed.
3. Insert the end with a 2.5mm hole into the new handle, and make the two holes completely overlapped. (PS. If it can’t be overlapped, just flip it 180 degrees)
4. Screw the little M2.5 Grub Screw in and fix it with the L-shape hex wrench. It’s down. You can also try to pull it and make sure it is firmly.

Package:
1x Black Aluminum Pull Handle(comes with a fluoro rubber O-ring, which better prevents leakage and has a longer service life)
1x Hex wrench 1.27*17*47mm
1x M2.5x8mm Hexagon socket head 12.9 grade
1x 2.6mm high-speed steel twist drill