3mirrors 4-Port CVT Transmission Oil Cooler Compatible with Nissan Sentra Juke Rogue Versa Sedan 21606-1XF0A 21606-3TX0A
21 Reviews
In Stock
- Upgraded CVT Transmission Oil Cooler 4 Port & O-Ring Seal Gasket for Nissan 2007-2012 Sentra / 2011-2014 Juke / 2008-2018 Rogue / 2012-2018 Versa Sedan 21606-1XF0A
- Some vehicles’ original coolers only have two pipes, they need an extra little radiator to connect with this cooled. It will provide an excellent CVT cooling system.
- Nissan CVT transmission heat often goes too high in summer and the car goes into limp mode. This cooler will fix this problem.
- Reference Part Numbers: 216061XF0A, 21606-1XF0A, 216063TX0A, 21606-3TX0A.
- Installation: Replace the original 2 ports cooler with this 4 ports cooler >> Install auxiliary transmission cooling radiator on your desired location >> Connect the small ports on the NEW cooler to the new auxiliary transmission cooling radiator >> Add CVT oil as needed. To save you time and money, it is advisable not to settle for low-quality and cheap products that won’t last long.
Just like oem
Just like oem and now we will see how the last. But they are definitely great.
Shinny77on September 6, 2018
Fixes the Nissan CVT overheating issue.
Perfect fit, part of the fix for the Nissan CVT overheating problem many have encountered. A road trip to Vegas going up I-15 in 110 degree heat, and no limp mode or tranny whine issues. This part with a good transmission cooler is all you need.
Nlm1974on September 24, 2018
Fit Perfect
Fit perfect for my Sentra 2.008.
CESAR CHACON PLATAon May 13, 2019
Solves Trans overheating problem with aux cooler
Perfect fit and with an additional cooler it works perfectly to update the car and no longer have the trans over heating issue
Anthony Martinion May 27, 2019
waycrossa auto sales
we rate you 5 stars
eugene taylor waycross auto saleson June 10, 2019
Doing by pass for cooling sistem.
For doing by pass cooling rouge Nissan its work, for what we used thanks .
No publicon July 14, 2019
I recommend this product without hesitation to other buyers
Good afternoon, I want to thank you for the solution you have given me with your product, it has really been what I expected. regards
Elmer o.on July 16, 2019
Doesn’t work on Nissan
Sorry guys, this is not the fix for JATCO transmissions. 120 miles in Im writing this review from the side of the road because Im back in limp mode. This will catch up to Nissan and theyll have to spend several years rebuilding their brand and regaining consumers trust-just like Ford and GM after 80s and 90s.
My car is a 2011 Rogue with 90k miles. Between fluids and parts Im out about $300 and a couple hours of time
AqueVedoon July 26, 2019
Good product, works perfectly
A pain in the rear to install, but the product worked great. Wish I would have installed it sooner. I paired it up with a generic tranny cooler. Happy I did it, but never want to again. The product is exactly as described. Good quality.
SpitefulMonkeyon July 30, 2019
I had no issues with the installation.
Perfect fit. Works as intended.
Bill Reillyon August 28, 2019
Works great!!
My 09 nissan Muranos transmission would over heat on 2hr drives on the highway. Would have to pull over twice to allow the trans to cool down. Would also go into limp mode. After installing this part all the problems went away! You will need to mount and install a external transmission cooler as well!
Richon September 3, 2019
Producto en excelentes condiciones
The product was the one shown in the photo, it was in good condition, and in the perfect vehicle. Thank you
Moroccan Sergio Vargason December 18, 2019
Leaked – warped mating surface
(1) The CVT fluid cooler that I received and installed leaked after test drive, troubleshooting recheck, and then another test drive. We removed it, made a more thorough inspection and discovered that its mating surface was warped with a slight concave shape between the four mounting bolt holes. Because of this, we believe the cooler and its included o-ring could not form a leak-free seal under cvt fluid operating temps/pressures.
(2) Furthermore, though product description and the packaging stated new, upon unboxing we noted that this item appeared used with scratches and an unpolished poor quality finish on the mating surface and dings and roughness along the edges.
As comparison, the OEM coolers mating / O-ring surface is absolutely flat and is leak free. Fyi, this job is per Nissan TSB 13-095c. Returning this item and hoping the replacement from Amzn is good.
Andres Martinezon January 14, 2020
Does not fit the versa
Was not for the versa
Stefanieon February 7, 2020
Very good up grade
Works fine. Pretty good up grade to add a transmission oil cooler.
Saad Aldakheelon March 8, 2020
Pre 2014 rogue models and Rogue select.
Not for 2014 gen 2 rogues. They already come with a 4 port. This is for the Rogue select or pre 2014 models. The 2014 gen2s have this and still have issues with overheating trans. Just buy a trans oil cooler.
Pedro Ramoson May 5, 2020
Defective part
I take off this part today mi car just was coming oil for the lower part 2 bolts I checked if the bolts was lose but everything was good so I change for the factory part good I saved in my home so my car is no liking anymore is sad
Patty Banueloson June 24, 2020
Same as the Pros
Save your CVT transmission from destined failure. This is the same style that the pros use. Had to 2 different failures 2 months apart. This is the same cooler that the transmission shop added. Bought this one to be saved from a 3rd Nissan failure.
azararecon July 12, 2020
So far so good
Added this to my daughters rogue, along with an additional oil cooler behind the grill. So far, no more overheating, and going in to limp mode. But itll be late summer before we really know how much difference it really makes. Word of advice, these vehicles have 2 transmission filters. One of them is located behind the oil cooler. Pick up a new one before you install this item. It literally take 10 seconds to install the new filter, if you have it on hand. Filter was $12 at the local parts store
johnny phillipson March 9, 2022
Works just as described
Its a great replacement to add an external cooler. I read some reviews where it leaked on some people for being uneven at the base plate. I think that could be installation errors. Just to let you know it doesnt come with the external cooler.
bryceon April 20, 2022
Coolant line pointing the wrong direction, this will not work on a Nissan Juke
The bottom coolant line on this cooler is pointed 180 degrees off from the original part on my 2014 Nissan Juke. It says it fits my car accordingto the application chart, it doesnt. My original coolant line will kink and cut off circulation if I try to install it. Trying to find a custom shaped hose will be difficult because the parts shops can only look up parts by year make and model, and the oem parts no longer works thanks to the way this cooler is designed
TruckTraderon June 12, 2022